Musical Fidelity A1

Specifikationer:

Amplifier



Power: 25 Watts per channel into 8 Ohms
Voltage: 42.5 Volts peak to peak
Current: 25 Amps peak to peak
Damping Factor: 150
Gain (volume max): 32dB (Direct Mode), 42dB (Normal Mode)
Output devices: 2 per channel
Signal / noise ratio: 82dB
Channel separation: 85dB
Frequency response: + 0, –1dB, 10Hz to 40 kHz
Line level sensitivity: 300mV rms nominal, 8V rms max
Line level inputs impedance: 25k Ohms
Tape Out impedance: 220 Ohms
Pre Out impedance: 100 Ohms


Phono Preamp



Phono RIAA response: +/- 1dB
MM sensitivity: 5mV nominal
MM capacitance / impedance / gain: 100pF / 50k Ohms / 40dB
MM signal / noise ratio: 75dB
MC sensitivity: 450μV nominal
MC impedance / gain: 1k Ohm / 60dB
MC signal / noise ratio: 70dB


Inputs



1x phono RCA MM/MC, 5x line RCA


Outputs



1 x line level RCA fix TAPE OUT
1 x line level RCA var PRE OUT
1 x 4mm banana/binding posts SPEAKER OUT


General Information



Dimensions (WxHxD): 440 x 68.3 x 283.3 mm
Main voltages: 230V/115V Internally set or 100V optional
Max. Consumption: 130W, 0W in standby (=Power Switch OFF)
Weight: 10.5kg